On this page 9 sections
The standard roller banner size in the UK is 850 x 2000 mm, about 2ft 9in wide and 6ft 7in tall. Other widths are 800, 1000, 1200 and 1500 mm, all 2000 mm high. Choose 800 or 850 mm for receptions and tight spaces, and 1000 to 1500 mm to fill a wall or exhibition bay.
Every width, side by side
Roller banners (also called pull up or roll up banners) keep the same height and change width. That makes them easy to line up: two or three of the same height next to each other read as one wall of graphics.
| Size (mm) | Approx. in feet | Where it suits |
|---|---|---|
| 800 x 2000 | 2ft 7in x 6ft 7in | Narrow corners, doorways, small stands |
| 850 x 2000 | 2ft 9in x 6ft 7in | The everyday choice for offices, events and receptions |
| 1000 x 2000 | 3ft 3in x 6ft 7in | Stands where you want more room for images |
| 1200 x 2000 | 3ft 11in x 6ft 7in | Backdrops for talks, larger shell schemes |
| 1500 x 2000 | 4ft 11in x 6ft 7in | Photo walls and the back of a stand |
Why 850 mm became the standard
It is a sensible balance. At 850 mm wide the stand is light enough to carry in one hand, fits through any doorway rolled up, and still gives room for a logo, a headline and three or four short points. Most carry bags, flight cases and shell-scheme stands are planned around it. If you only buy one, an 850 x 2000 mm roller banner is the safe choice.
When a wider banner makes sense
1000 mm
A 1000 mm wide roller banner adds space for a large photograph without squeezing the text. It suits stands where the banner is the main visual rather than one of several.
1200 mm and 1500 mm
These start to act like a backdrop. A 1500 x 2000 mm roller banner behind a speaker or a photo point fills the frame of most phone photos. They are heavier to carry, so check the venue access and whether you will be setting up alone.
800 mm
The narrowest option is useful in tight spaces: beside a lift, in a corridor, or at a reception desk where a wider stand would block the walkway.
How much of the banner people actually see
The full 2000 mm height is printed, but not all of it is equally visible. The bottom 150 to 200 mm sits close to the base and is often hidden behind a table or a chair. The top third is at eye level for a standing adult, which is where your name and headline belong.
- Top third: logo and the one line people must read.
- Middle third: photo, product or short list of services.
- Lower section: website, phone number or a QR code, kept above the bottom 200 mm.
Setting up the artwork
Set your document to the exact size you order, for example 850 x 2000 mm. No extra bleed is needed for roller banners, but keep everything important out of the bottom 150 to 200 mm. Photos look sharp at 100 to 150 dpi at full size because people read a roller banner from a metre or two away. Logos and text are best as vector artwork in a PDF.
If you are designing in Canva or PowerPoint, create a custom page at the full size in millimetres and export a full-quality PDF. Every upload is checked automatically before it prints, and you will be told if something looks soft or sits too low.
Which stand to choose for each size
The size is only half the decision. Roller banners come with different cartridges (the base and mechanism) and different print materials. The budget cartridge suits occasional use; standard plus and premium bases are sturdier for regular events. The 610gsm blockout material stops light from behind showing through, which matters in bright halls and in front of windows. You can compare every option on the roller banners page, or browse all stands in the roller banner range.
Planning a row of banners
For an exhibition bay, measure the back wall and divide by the widths available. A 3 m wall takes three 1000 mm banners or two 1500 mm banners. Leave a small gap between stands so the bases do not clash, and design the artwork so each banner still works alone, in case you take only one to a smaller event.
Carrying and transport
Every roller banner rolls down into its own base and packs into a carry bag, so the size you choose also decides how you move it. An 800 or 850 mm stand fits across the back seat of most cars and can be carried on a train. The 1200 and 1500 mm widths are longer than many car boots are wide, so measure before you book a venue that is a drive away. If you travel to events often, the narrower sizes save a lot of effort over a season.
The pole that holds the banner up comes in sections and clips together, which is why the height stays the same across the range. That also means the packed length of the stand is roughly its width, not its height.
Questions
What is the standard size of a roller banner?
The standard size is 850 x 2000 mm. It is easy to carry, fits most stands and gives room for a logo, headline and a few points.
How tall is a pull up banner?
Pull up banners in our range are all 2000 mm tall, which is about 6ft 7in. Only the width changes between sizes.
How wide is a roll up banner?
Roll up banners come in 800, 850, 1000, 1200 and 1500 mm widths. The 850 mm width is the most popular.
Do roller banners need bleed?
No extra bleed is needed. Set the artwork to the exact size and keep important text out of the bottom 150 to 200 mm, which sits near the base.
Can I put two roller banners side by side?
Yes. Because they share the same height, two or three banners line up neatly. Design each so it still works alone.